|
SHARP MULTISYSTEM VCP
Features:
- On-Screen Display for Easy Operation
- New High-Speed (380x) Rewind Function*1
- New LP Playback Capability
- NTSC Recording Capability through A/V Terminals
- One-Touch Memory
Enables the viewer to mark a scene they want to see. The tape is
automatically rewound to the scene selected when the one-touch memory
button is pressed.
- Advanced Sharp Super Picture for Clearer and More
Detailed Pictures
- Best price at welectronics.com
- Auto Voltage (110 – 240 V)
- NTSC Playback on PAL-60 TVs*2
- Fully Automatic Playback Function
- Digital Automatic Tracking Control System
|
|
Description
|
|
Video Format |
VHS standard
(PAL, MESECAM, NTSC) |
|
Video Signal System |
PAL-B/G, D/K,
SECAM-B/G, DK (MESECAM), NTSC-3.58, 4.43 |
|
Tape Speed (mm/s) |
PAL: |
23.39 (SP), 11.70
(LP) |
| MESECAM: |
23.39 (SP), 11.70
(LP) |
| NTSC: |
33.35 (SP), 11.12
(EP) |
|
Recording/ Playback Time |
PAL: |
240 min (SP,
E-240 tape),
480 min (LP, E-240 tape) |
| MESECAM: |
240 min (SP,
E-240 tape),
480 min (LP, E-240 tape) |
| NTSC: |
160 min (SP,
T-160 tape), 480 min (EP, T-160 tape) |
|
Rewind / Fast Forward Time |
Approx. 60 sec
(with E-180 tape)*1 |
|
RF Output |
UHF: E21-E69
adjustable |
|
Horizontal Resolution |
more than 250
lines |
|
Video S/N Ratio |
more than 45 dB |
|
Audio S/N Ratio |
approx. 42 dB |
|
Audio Frequency Response |
80 Hz to 10 kHz |
|
Audio Dynamic Range |
- |
|
Wow and flutter Power |
- |
|
Power Requirements |
AC110-240V,
50/60Hz |
|
Power Consumption |
11W at AC 240V, 50/60Hz |
Dimensions
(WxHxD) mm |
360 x 92 x 231.4 |
|
Weight (kg) (approx.) |
2.7 |
*1
The rewind speed may be slower for the cassette tapes other than E-60, E-120
or E-180.
*2 Notes on NTSC playback on PAL-60
TVs:
- If your PAL TV doesn't have a vertical hold control, you may not be
able to view NTSC tapes because the picture may roll. If the TV has a
vertical hold control, adjust it until the picture stops rolling. On some
TVs, the picture may shrink vertically, leaving black bands at the tap and
bottom of the screen. This is not a malfunction: it is caused by NTSC
playback on a PAL TV.
- When using special effect playback features (video search, still
picture, slow and frame advance), noise bars will appear, and the picture
may change from colour to monochrome. The colour can be restored by
pressing the TRACKING buttons two or three times.
- When an NTSC tape is played back on a PAL TV, the programme cannot be
copied or edited on a PAL VCR.
|
|
